Qingdao Allite Auto Technic Co.,Ltd
ADD:No.3 Allite Road, Economic Development Zone, Pingdu, Qingdao, China
Side of the compressed garbage truck is through the rod to enhance the trash automatically into the garbage, and to the rear of the car to push the garbage, to achieve the purpose of compressed garbage, compression principle is the use of machine, electricity, hydraulic linkage control system, computer control and manual operation System, through the filling device and push the shovel and other devices to achieve garbage into, crushed or crushed, and the garbage into the compartment and compaction and shirking. Its characteristics are: compression ratio, high load: the maximum crushing pressure of 12 tons, the equivalent of the same amount of tons of non-compressed waste with two and a half times.
Comparison of Compressed Garbage Trucks with Back - loading Compressed Garbage Trucks
The biggest difference between a side-mounted compressed garbage truck and a back-loaded garbage truck is the loading method. The former is the side of the equipment, through the rod to enhance the trash automatically into the garbage, and to push the rear of the compartment to squeeze garbage, to achieve the purpose of compressed garbage. The latter is from the back through the direct hanging bucket or manual input into the garbage, and pushed to the front of the car squeeze garbage, to achieve the purpose of compression.
Two compressed garbage truck unloading methods are the same, are pushed through the compression of the push plate to achieve the purpose of unloading. Can be collected in the trash bin garbage inside the garbage compartment, through the compression device will be compressed into a garbage truck transport, saving garbage volume, speed up the efficiency, no secondary pollution.